BPI® Standard BarSplicer
Coupler with Standard National Coarse Threads and Flange.
- Pre-fabricated Setting & Splice Bars – Made by BPI® to your dimensions, straight, hooked, single or double ended connections, etc.
- Epoxy coated and Galvanized finished available.
- Dowel Bar Replacement – No drilling holes through forms. Flanged couplers have holes that permit nailing to the sides or ends of formwork.
- XP Series – MTO approved. Bars supplied by BPI® exceed 150% Fy, Metric Grade 400 uncoated bar.
- Barsplicer Brochure
BPI® BarSplicer Couplers
BPI® BarSplice Flanged Coupler
| Rebar Size | Thread Size | Weight (lbs) | Length (in) | Diameter (in) | Flange (in) | Bevel (in) |
|---|---|---|---|---|---|---|
| 4 | 1/2 - 13 UNC | 0.28 | 1 3/4 | 7/8 | 2 x 2 | – |
| 5 | 5/8 - 11 UNC | 0.35 | 2 | 1 | 2 x 2 | – |
| 6 | 3/4 - 10 UNC | 0.40 | 2 1/8 | 1 1/8 | 2 x 2 | – |
| 7 | 7/8 - 9 UNC | 0.50 | 2 1/2 | 1 1/4 | 2 x 2 | – |
| 8 | 1 - 8 UNC | 0.90 | 3 | 1 1/2 | 2 x 2 | – |
| 9 | 1 1/8 - 7 UNC | 1.50 | 3 1/2 | 1 3/4 | 3 x 3 | – |
| 10 | 1 1/4 - 7 UNC | 2.35 | 4 | 2 | 3 x 3 | – |
| 11 | 1 3/8 - 6 UNC | 2.40 | 4 1/2 | 2 | 3 x 3 | – |
| Scroll horizontally to see more columns. | ||||||
BPI® BarSplice Position Coupler
| Rebar Size | Thread Size | Weight (lbs) | Length (in) | Diameter (in) | Flange (in) | Bevel (in) |
|---|---|---|---|---|---|---|
| 4 | 1/2 - 13 UNC | 0.22 | 1 3/4 | 7/8 | – | – |
| 5 | 5/8 - 11 UNC | 0.30 | 2 | 1 | – | – |
| 6 | 3/4 - 10 UNC | 0.35 | 2 1/8 | 1 1/8 | – | – |
| 7 | 7/8 - 9 UNC | 0.50 | 2 1/2 | 1 1/4 | – | – |
| 8 | 1 - 8 UNC | 0.90 | 3 | 1 1/2 | – | – |
| 9 | 1 1/8 - 7 UNC | 1.50 | 3 1/2 | 1 3/4 | – | – |
| 10 | 1 1/4 - 7 UNC | 2.35 | 4 | 2 | – | – |
| 11 | 1 3/8 - 6 UNC | 2.40 | 4 1/2 | 2 | – | – |
| Scroll horizontally to see more columns. | ||||||
BPI® BarSplice Structural Connector
| Rebar Size | Thread Size | Weight (lbs) | Length (in) | Diameter (in) | Flange (in) | Bevel (in) |
|---|---|---|---|---|---|---|
| 4 | 1/2 - 13 UNC | 0.15 | 1 3/8 | 7/8 | – | 3/16 |
| 5 | 5/8 - 11 UNC | 0.20 | 1 1/2 | 1 | – | 1/4 |
| 6 | 3/4 - 10 UNC | 0.40 | 1 3/4 | 1 1/4 | – | 1/4 |
| 7 | 7/8 - 9 UNC | 0.50 | 2 | 1 3/8 | – | 5/16 |
| 8 | 1 - 8 UNC | 0.85 | 2 1/3 | 1 5/8 | – | 3/8 |
| 9 | 1 1/8 - 7 UNC | 1.05 | 2 5/8 | 1 3/4 | – | 7/16 |
| 10 | 1 1/4 - 7 UNC | 1.50 | 3 | 2 | – | 1/2 |
| 11 | 1 3/8 - 6 UNC | 1.55 | 3 3/8 | 2 | – | 9/16 |
| Scroll horizontally to see more columns. | ||||||
BPI® BarSplice DoughNUT™
| Rebar Size | Thread Size | Weight (lbs) | Length (in) | Diameter (in) | Flange (in) | Bevel (in) |
|---|---|---|---|---|---|---|
| 4 | 1/2 - 13 UNC | 0.22 | 3/4 | 1 1/4 | – | – |
| 5 | 5/8 - 11 UNC | 0.37 | 7/8 | 1 1/2 | – | – |
| 6 | 3/4 - 10 UNC | 0.55 | 15/16 | 1 3/4 | – | – |
| 7 | 7/8 - 9 UNC | 0.95 | 1 1/4 | 2 | – | – |
| 8 | 1 - 8 UNC | 1.42 | 1 5/16 | 2 3/8 | – | – |
| 9 | 1 1/8 - 7 UNC | 2.15 | 1 1/2 | 2 3/4 | – | – |
| 10 | 1 1/4 - 7 UNC | 2.50 | 1 5/8 | 2 7/8 | – | – |
| 11 | 1 3/8 - 6 UNC | 3.75 | 1 7/8 | 3 1/4 | – | – |
| Scroll horizontally to see more columns. | ||||||
Setting Bar Options and Part Numbers
| Part # | Option | Diagram |
|---|---|---|
| BS-B | STRAIGHT Specify ‘A‘ |  |
| BS-E | 90° BEND Specify ‘A‘ & ‘B‘ |  |
| BS-F | 180° HOOK Specify ‘A‘ |  |
| BS-C | 45° BEND Specify ‘A‘ & ‘B‘ |  |
| BS-Q | 135° BEND Specify ‘A‘ & ‘B‘ |  |
| BS-A | DOUBLE END Specify ‘A‘ |  |
| BS-D | U-SHAPE DOUBLE END Specify ‘A‘ & ‘B‘ |  |
| BS-J | POSITIONAL STRAIGHT Specify ‘Ap‘ |  |
| BS-K | POSITIONAL 90° BEND Specify ‘Ap‘ & ‘B‘ |  |
| BS-S | HEADED STRAIGHT Specify ‘A‘ |  |
Splice Bar Options and Part Numbers
| Part # | Option | Diagram |
|---|---|---|
| BS-H | STRAIGHT Specify ‘C‘ |  |
| BS-G | 90° BEND Specify ‘C‘ & ‘D‘ |  |
| BS-I | 180° HOOK Specify ‘C‘ |  |
| BS-P | 45° BEND Specify ‘C‘ & ‘D‘ |  |
| BS-R | 135° BEND Specify ‘C‘ & ‘D‘ |  |
| BS-O | DOUBLE END Specify ‘C‘ & ‘Z‘ |  |
| BS-N | CONTINUITY DOUBLE END Specify ‘C‘ |  |
| BS-L | POSITIONAL STRAIGHT Specify ‘Cp‘ |  |
| BS-M | POSITIONAL 90° BEND Specify ‘Cp‘ & ‘D‘ |  |
| BS-T | HEADED STRAIGHT Specify ‘C‘ |  |
How to Order BPI® BarSplicer Setting and Splice Bars
The most commonly used splice and setting bars are STRAIGHT or have a 90 degree hook as follows:
The following chart is an easy way to organize your BPI® BarSplicer requirements. Many other configurations can be ordered as shown on the BPI® BarSplicer configuration chart, just include the BPI® PART NUMBER for easy reference.
