Starcon Utility & Type U Anchors

Utility Anchors
Part NumberAnchor IdentificationTypical Slab Thickness (in)WD-Wire Diameter (in)W-Width (in)H-Height (in)Fd-Foot Diameter (in)
LUAG444/44"0.444"5-1/4"3-1/8"3/4"
LUAG545/45"0.444"6"3-3/4"3/4"
LUAG646/46"0.444"7-3/8"4-3/4"3/4"
LUAG565/65"0.671"6-7/8"3-3/4"1-5/8"
LUAG666/66"0.671"7-3/8"4-3/4"1-5/8"
LUAG868/68"0.671"9-3/4"6-3/4"1-5/8"
Scroll horizontally to see more columns.
Utility Anchors .444″ and .671″
Safe Working Load provides a factor of safety of approximately 4:1. Table is based on a minimum concrete compressive strength of 4,000 psi. When using as a Pulling Iron, loads from this chart may be increased by 33% from a 4:1 safety factor to a 3:1 safety factor.
Part NumberSlab Min. (in)Edge Distance (in)Anchor Ultimate
Mechanical Load
in Tension (lbs)
4:1 SWL at
90° Tension
(lbs)
4:1 SWL at
90° Shear
(lbs)
LUAG444"9"14,0003,2005,800
LUAG545"10"22,0003,8607,710
LUAG646"12-1/2"26,0004,4609,460
LUAG565"10"24,0004,5608,430
LUAG666"12-1/2"30,0007,32015,780
LUAG868"15-1/2"52,00010,83018,850
Scroll horizontally to see more columns.
Rubber Former
Starcon U-Anchors Rubber Former
Product NumberWire Diameter
U14F1/4"
U516F5/16"
U38F3/8"
U716F7/16"
Scroll horizontally to see more columns.
Rubber Formers
Utility Anchor Rubber Formers
Product NumberWire Diameter
LUA450.444
LUA670.671
Scroll horizontally to see more columns.
Setting Plate
Utility Anchor Setting Plate
Part NumberFormer
LUA45HPLUA450
LUA670HPLUA670
Scroll horizontally to see more columns.
U-Type Block Anchor
Starcon U-type Block Anchors
Part NumberSize (in)WD (in)W (in)D (in)L (in)SWL (lbs)Weight (kg)
U1462G1/4"x6"0.25"2-5/8"1/2"6"16000.80
U516652G5/16"x6-1/2"0.315"2-5/8"3/4"6-1/2"32000.157
U3872G3/8"x7"0.375"2-3/4"1"7"46900.24
U71692G7/16"x9"0.45"3-1/2"1"9"75000.476
U716112G7/16"x11"0.45"3-1/2"1"11"75000.57
U716182G7/16"x18"0.45"3-1/2"1"18"75000.905
Scroll horizontally to see more columns.
Landcon Products